Author Topic: bandwidth limiting  (Read 78 times)

Offline jshorr24

  • Contributor
  • ***
  • Posts: 3
bandwidth limiting
« on: March 26, 2025, 01:44:48 pm »
Hello,

May be a stupid question but speed limiting does not seem to be working for me?  Setting up a new PC with a altbinz 48.6.6.  I use usenetserver with 20 connections.  In setup/connection I chose to limit to 500Mbps.  My internet bandwidth is 1000Mbps.  When downloading it is going well over 500Mbps, doesn't seem to be throttling at all.  I also figured maybe it was per connection so I changed it to 25Mbps and that didn't do anything either.  Yes I am saving, disconnecting/reconnecting, tried restarting the software also.

Thanks

Offline Rdl

  • Administrator
  • *****
  • Posts: 4108
Re: bandwidth limiting
« Reply #1 on: March 26, 2025, 04:02:54 pm »
You are not setting limit there. There you should set your full connection speed (1000 in your case). After exiting setup, you left click on 'No limit' in lower left corner and set desired percentage.
« Last Edit: March 27, 2025, 03:12:11 pm by Rdl »

Offline jshorr24

  • Contributor
  • ***
  • Posts: 3
Re: bandwidth limiting
« Reply #2 on: March 27, 2025, 02:41:41 pm »
thank you